News:

Welcome to ForumMate.com

Main Menu

Website Login Problem

Started by Strela2M, March 03, 2011, 11:14:27 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Strela2M

Hello All...

I have a little (or big) problem about guest registering at website.

Problem is next... When someone register at website, then he/she receive confirmation e-mail and after clicking on it following message shows up: "Could not locate remote server"

Account activation:

Enable account activation: None; User; Admin (I ticked admin because with none not works)

Activation Type: AUTOMATIC; MANUAL (ticked automatic)

After registration, say's You're "something" will be approved in next 24 hours or similar. (no matter of account activation, it was on none)
So i have to approve everyone manually... Seems server automatic sends another password because after clicking to confirm, and message pops up, the probably server sending another password...


Another problem i have is a max size of avatars, its a 12288 bytes and max avatar size is 200x200pxl.... When i save new avatar size, i refresh and again its on 12288pxl


Hence, if is there any solution to solve this problems I would be very thankful...

Regards, Strela2M

http://sexyuclan.freephpnuke.org/

Strela2M

Forgot to say version... its  "phpBB 2.0.19" phpBB port v2.0.7 based on Tom Nitzschner's phpbb port 2.0.6 upgraded to phpBB 2.0.7 standalone.

tanduy2506

Quote from: Strela2M;537507I have a little (or big) problem about guest registering at website.

Problem is next... When someone register at website, then he/she receive confirmation e-mail and after clicking on it following message shows up: "Could not locate remote server"
Hi Strela2M,
I'm trying to check it.
Quote from: Strela2M;537507Account activation:

Enable account activation: None; User; Admin (I ticked admin because with none not works)
It's General Configuration of phpBB2 (/modules/Forums/admin/admin_board.php?mode=config) and different with:
Quote from: Strela2M;537507Activation Type: AUTOMATIC; MANUAL (ticked automatic)
It's Approve Membership module of phpNuke (/admin.php?op=activate)
Quote from: Strela2M;537507After registration, say's You're "something" will be approved in next 24 hours or similar. (no matter of account activation, it was on none)
So i have to approve everyone manually... Seems server automatic sends another password because after clicking to confirm, and message pops up, the probably server sending another password...
When you choose manual activation, this module will generate password. So, the new members could change their password when log in your forum.
Quote from: Strela2M;537507Another problem i have is a max size of avatars, its a 12288 bytes and max avatar size is 200x200pxl.... When i save new avatar size, i refresh and again its on 12288pxl

Hence, if is there any solution to solve this problems I would be very thankful...
So sorry about that,
We don't allow change these settings for some reasons.
Hope you understand.

Strela2M

#3
Ok, no probs about avatars,...

Is there a way that I/You can upgrade phpBB2 2.0.19 to newer? phpBB2 2.0.19 seems to be old one :grin:

One more thing. theres is a "In total there is 1 user online :: 1 Registered, 0 Hidden and 0 Guests   [ Administrator ]   [ Moderator ]" is that possible to add groups which will be visible here same as administrator & moderator with defined color?

tnx

tanduy2506

Quote from: Strela2M;537520Ok, no probs about avatars,...
Nice.
Quote from: Strela2M;537520Is there a way that I/You can upgrade phpBB2 2.0.19 to newer? phpBB2 2.0.19 seems to be old one :grin:
We really want to upgrade it but phpNuke server is too big. Maybes, that's future plan.
Quote from: Strela2M;537520One more thing. theres is a "In total there is 1 user online :: 1 Registered, 0 Hidden and 0 Guests   [ Administrator ]   [ Moderator ]" is that possible to add groups which will be visible here same as administrator & moderator with defined color?
Do you want to say about "Who is Online" module?
I'll check it and try to find a way.
I'm not sure about that.
Thanks for choosing our service.

Strela2M

Correct, to add a group which will be in same column with [Administrator] and  [Moderator] with own color, and members to have color of that group in forums etc..

pasha_kazmi

Why do I have to re-login to sites after restarting firefox that I had already logged in to that had beenWhy do I have to re-
Signiture Removed due to forum ToS!

Strela2M

Tick "save password" for this site or similar...

Strela2M

Problem is next... When someone register at website, then he/she receive confirmation e-mail and after clicking on it following message shows up: "Could not locate remote server" (or similar) - still popping up , could someone fix it?

Strela2M

Problem done, i find out solution... :D

Strela2M

Could someone restore Shout-Box layout, something messed up, i cannot.

Strela2M

Group Permissions Control

Here you can alter the permissions and moderator status assigned to each user group. Do not forget when changing group permissions that individual user permissions may still allow the user entry to forums, etc. You will be warned if this is the case.

- How to put multiple users in group?

tanduy2506

Hello Strela2M,
Quote from: Strela2M;537537Problem done, i find out solution... :D
Well, you find out solution for what?
Please share it. Excellent, friend :)
Quote from: Strela2M;537538Could someone restore Shout-Box layout, something messed up, i cannot.
You can't set all things about shout-box in ACP (/admin.php?op=shout).
I see it looks okay. Ah, do you want to say about the color of table in shout-box?
Please change themeing (/admin.php?op=shout&Submit=ShoutBoxThemeing).
Ex: Your theme is "AcidTechRed". You find and change the color code of this theme. (Shout Box 1: #000000, Shout Box 2: #B1B100, ...)
If you want to say about this theme, I can't customize it for you.

Strela2M

Quote from: tanduy2506;537540Well, you find out solution for what?
Please share it. Excellent, friend :)

For "When someone register at website, then he/she receive confirmation e-mail and after clicking on it following message shows up: "Could not locate remote server"

1st step: To fix it, Administration > Approve Membership > Tick Automatic > Click approve membership just under, and scroll down almost on the bottom, > "Approve Membership" Member activation type: Tick Automatic

2nd step: Administration > (Modules Administration) Forums > (General Admin) Configuration > Enable account activation - tick None..... and thats it.

Now, when someone register, will receive e-mail with confirmation link, after clicking on it will activate account and i'm not sure if it gonna be Logged in or not, but anyway would not receive another e-mail with another passw or some complications.

tanduy2506

Quote from: Strela2M;537541For "When someone register at website, then he/she receive confirmation e-mail and after clicking on it following message shows up: "Could not locate remote server"

1st step: To fix it, Administration > Approve Membership > Tick Automatic > Click approve membership just under, and scroll down almost on the bottom, > "Approve Membership" Member activation type: Tick Automatic

2nd step: Administration > (Modules Administration) Forums > (General Admin) Configuration > Enable account activation - tick None..... and thats it.
Good,
Actually, I wrote "Approve Membership" based on "PHP-Nuke Activate 3.0".
Php Nuke is like a portal. It integrate phpBB2 forum into it. So, there are some conflict at here. Hope you understand.
phpNuke have existed for a long time. Now, it seems there is no one develop phpNuke anymore :(
But it's really a good system. If you need something change, we'll try to add new features for it.